RHUB TM-510 Specifications download pdf (Page 112)

100

101

TM 9-2350-311-34-1

5-5 AIR CLEANER BLOWER MOTORS — CONTINUED

b. Inspection, Repair, and Test — Continued

10 Test capacitor (20) for continuity. If resistance value is indicated on multimeter, replace capacitor.

11 Inspect impeller housing (39). Replace if cracked or damaged.

12 Inspect commutator end bell (9). Replace if cracked or damaged.

13 Inspect motor cover (3). Repair if cracked, dented, or damaged. Replace if beyond repair.

c. Assembly

Install ground wire (38) and repeat step 2

for

second brush assembly holder (29).

2 install brush assembly holder (29), two new lockwashers (26), and two screws (25) to commutator end bell (9).

3 Install clip (37) and screw (36) to commutator end bell (9).

4 Install flat washer (35), two bearings (34), armature (33), stator (32), and motor cover (3).

5 Install two new Iockwasher (31) and two screws (30).

6 Install brush (28), spring (27), electrical lead (6), new Iockwasher (26), and screw (25) to brush assembly

holder (29).

7 Install felt washer (24) and washers (23).

8 Screw impeller (22) to armature (33) and install new self-locking nut (21).

5-30

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 352 353

Comments to this Manuals

No comments

RHUB TM-510 Specifications Page 112

Comments to this Manuals